Tailor-made Measurement Systems Product list
Camshaft measuring deviceConcentricity testing device for large rotationally symmetrical workpiecesCrankshaft measuring equipmentCuttting roller measuring deviceLength adjustment deviceLength measuring machineMeasuring station with gauge-specific calibration and setting standardsMeasuring table for tube and sheet metal partsPlanarity measuring device for thin large-scaled substratesRolling measuring equipmentSurface line measuring device - horizontalSurface line measuring device - verticalTaper gauge setting deviceTurbine rotor measuring equipmentPRODUCTSTailor-made Measurement Systems Measuring station with gauge-specific calibration and setting standards
Measuring station with gauge-specific calibration and setting standards
Compact and space-saving measuring station for the micron-precise fixation and calibration of non-identical gauges
Construction / Functionality
The base plate is made of natural hardstone and has a finely grounded and lapped top surface. Five T-guiding- and -clamping slots are brought into the top surface while the four slots in cross direction traverse the single slot in longitudinal direction.
The T-guiding- and -clamping slots are used for guiding one reference standard and four setting standards, which are thus level and perpendicular to each other. The five standards are also made of natural hardstone and are equipped with an air-beared transportation and carrying system, which is brought into their stand spaces. This enables an easy and low-wear manual relocating and positioning.
Bushings and jig holders are mounted and adjusted at the precision surfaces of the reference standard and the setting standards in a defined manner. These are made of steel, annealed with low stress and coated to be protected against corrosion.
A welded-steel frame ensures a statically correct and strainless bearing of the measuring station. Alignment of the top surface by using a spirit level.
Technical data
Tailor-made construction
Other product versions upon request.
Construction / Functionality
The base plate is made of natural hardstone and has a finely grounded and lapped top surface. Five T-guiding- and -clamping slots are brought into the top surface while the four slots in cross direction traverse the single slot in longitudinal direction.
The T-guiding- and -clamping slots are used for guiding one reference standard and four setting standards, which are thus level and perpendicular to each other. The five standards are also made of natural hardstone and are equipped with an air-beared transportation and carrying system, which is brought into their stand spaces. This enables an easy and low-wear manual relocating and positioning.
Bushings and jig holders are mounted and adjusted at the precision surfaces of the reference standard and the setting standards in a defined manner. These are made of steel, annealed with low stress and coated to be protected against corrosion.
A welded-steel frame ensures a statically correct and strainless bearing of the measuring station. Alignment of the top surface by using a spirit level.
Technical data
Base plate dimensions: 2.000 x 1.5000 x 300 mm
Base plate weight: ca. 2.600 kg
Flatness - Base plate top surface: < 0,01 mm
Flatness, parallelism and perpendicularity of the T-guiding and -clamping slots (nominal size 14 mm H8 - DIN 650) to each other: 0,005 mm / 1.000 mm
Working height: ca. 900 mm
Tailor-made construction
Other product versions upon request.
OKTo ensure the basic functionality of our website, we use technically necessary 'first-party cookies'. By continuing to use our website, you agree to the use of cookies. You can find more information about cookies in our (Privacy Statement)